Texas has no single statewide building inspection department. Inspection is a local job, handled mostly by city governments, and that shapes how you find and use these offices. Our directory lists 79 offices across the state, from the Dallas Building Inspector on Old Greenville Avenue to the Eagle Pass Building Inspector on Bob Rogers Drive. This page explains who does what, so you reach the right counter on your first call.
Who Enforces Building Codes in Texas Cities and Counties
Cities hold the main power here. The Legislature authorizes Texas municipalities to adopt building codes and enforce them through permits and inspections. Most cities adopt the International Codes published by the International Code Council, then add local amendments. Each city council decides which edition applies and when to update it. A deck, fence, or water heater rule in one town may differ from the next town over.
Counties are different. Texas counties have limited authority over construction, so a house on unincorporated land often has no county building inspector at all. Counties do regulate subdivision platting, floodplain development, and road access. Septic systems fall under Texas Commission on Environmental Quality rules and are normally permitted through a local authorized agent. A city's building code also generally does not follow its extraterritorial jurisdiction, the unincorporated ring around the city limits.
The practical result is that your address decides your office. Before you search for a phone number, confirm whether the property sits inside city limits. Your county appraisal district map or your property tax bill will usually show the taxing city. If the answer is no city, ask the county permit or floodplain office what applies to your lot.
State requirements also reach into local inspections. Energy-efficiency rules for new construction come from state-level adoption of energy codes, and local inspectors typically check compliance during the framing and final stages. Your city's office can tell you which energy provisions apply to your project.
State Agencies That Affect Building Inspection in Texas
Although inspection is local, several state bodies set the rules for the trades and special situations that inspectors check.
- Texas Department of Licensing and Regulation (TDLR): licenses electricians and air conditioning and refrigeration contractors. It also administers the Texas Accessibility Standards, and larger commercial projects require review by a Registered Accessibility Specialist.
- Texas State Board of Plumbing Examiners: licenses plumbers and the plumbing inspectors that cities employ.
- Texas Real Estate Commission: licenses the private inspectors who examine homes for buyers and sellers. These are not city inspectors.
- Texas Department of Insurance: oversees the windstorm inspection program for structures in the designated Gulf coast counties, tied to coverage from the Texas Windstorm Insurance Association.
- Texas Department of Housing and Community Affairs: regulates manufactured housing, including installation requirements for manufactured homes.
Keep the two kinds of inspection separate. A city inspector checks that work follows the adopted code and signs off on permits. A private inspector hired by a buyer reports on condition and has no power to approve or reject construction. Calling the wrong one wastes a week.
Metro Departments and Small-Town Offices Across Texas
Dallas-Fort Worth shows the metro pattern. The Dallas County page holds more listings than any other county in our database, because each suburb runs its own department. Besides the Dallas Building Inspector at 11910 Old Greenville Avenue (214-670-7282), you will find the Addison Building Inspector at 16801 Westgrove Drive, the Carrollton Building Inspector at 1945 East Jackson Road, and the Coppell Building Inspector at 265 Parkway Boulevard. Across the line in Tarrant County, the Arlington Building Inspector at 101 West Abram Street (817-459-6148) and the Colleyville Building Inspector at 100 Main Street serve their own city limits only.
Central Texas shows the growth-corridor pattern. The Cedar Park Building Inspector at 600 North Bell Boulevard (512-258-2530) sits in Williamson County, while the Austin Building Inspector at 505 Barton Springs Road (512-974-2747) covers the capital. Busy growth areas mean many permit applications at once, so build review and inspection time into your schedule rather than assuming same-day service.
Smaller cities work differently. The Alice Building Inspector at 500 East Main Street (361-668-7275), the Bridgeport Building Inspector at 900 Thompson Street (940-683-3410), and the Canton Building Inspector at 290 East Tyler Street (903-567-2826) serve small populations, often with only a few staff. Building inspection may sit alongside code enforcement or planning, and counter hours can be shorter. Call ahead, confirm who handles inspections, and ask whether requests can be made by phone or email.
Border and river cities add their own conditions. The Del Rio Building Inspector at 114 West Martin Street (830-774-8553) and the Eagle Pass Building Inspector at 3295 Bob Rogers Drive (830-773-1111) serve Rio Grande communities where floodplain maps and older masonry buildings often come into play. If you are buying an older structure, ask about the permit history before you plan renovations.
What to Bring and When to Call Your Texas Building Inspector
Arriving prepared saves a second trip. For most permit or inspection requests, gather the following:
- The street address and, if you have it, the parcel or legal description.
- The permit number, if one has already been issued.
- A site plan and construction drawings for new structures, plus engineered foundation plans where your city requires them.
- License numbers for the electrical, plumbing, and mechanical contractors on the job.
- The owner's name and a phone number the office can reach during the day.
Most residential projects follow staged inspections: foundation before concrete is poured, then framing, rough-in work for electrical, plumbing, and mechanical systems, insulation, and a final. Leave work uncovered until the inspector approves each stage. Expansive clay soils across much of North and Central Texas make foundation design and inspection especially important, and a missed pre-pour check can mean expensive corrections.
Call before you start, not after. Unpermitted work can complicate a home sale or an insurance claim, and it is cheaper to get the permit right than to fix the problem later. Fees vary by city, often based on project valuation or a flat schedule, so ask the office for its current fee schedule rather than relying on a figure from another town. Many cities let homeowners handle some work on their own homes, but permits and licensed trades are still required in many cases, so ask what applies to you.
Timing matters too. Hail, tornado, and hurricane seasons bring surges of roofing and repair permits, and inspection calendars fill quickly after a major storm. If you are planning a roof, window, or siding replacement, book early in the season rather than waiting for the next weather event. Confirm office hours before you drive over, because the phone numbers and addresses in our listings are a starting point and individual cities change schedules.
Building inspectors in Texas are certified by the state and employed by local jurisdictions to enforce adopted construction codes, ensuring every permitted project is built safely and in conformance with approved plans. Inspector certification requirements and continuing education standards are established at the state level.
Building Inspector locations are available in 76 cities across Texas. They are spread across 45 counties.
Cities with the highest concentration include Dallas, Cedar Park, San Antonio, where active construction markets generate high inspection volumes across residential, commercial, and mixed-use development projects.
Contractors working in Texas should familiarize themselves with the state-adopted building code edition and any local amendments, as inspectors enforce the specific version and local modifications adopted by the issuing jurisdiction.
Building Inspector by Counties
Property owners in Texas who suspect unsafe or unpermitted construction on neighboring properties can file a complaint with their local building inspector's office. Inspectors have authority to issue stop-work orders, correction notices, and civil penalties for code violations, regardless of whether a permit was pulled.
Browse Building Inspector by county across Texas to find the nearest location.
Coast, Clay, and Hail: Local Conditions Behind Inspections in Texas
Texas packs very different building conditions into one state, and inspectors adjust to them. On the Gulf coast, the Dickinson Building Inspector at 4403 Texas 3 (281-337-6259) works in Galveston County, where wind and flood exposure drive stricter checks and the windstorm certification tied to Texas Windstorm Insurance Association coverage.
Inland, clay soil swells and shrinks with rain and drought, so foundation inspections matter. The Austin Building Inspector in Travis County is one example. In the Brazos Valley, the Bryan Building Inspector (300 Texas Avenue South, 979-209-5010) and the College Station Building Inspector (1101 Texas Avenue South, 979-764-3741) serve Brazos County, where new subdivisions and rental housing generate steady permit activity.
West Texas and the Panhandle bring wind and hail. The Abilene Building Inspector at 555 Walnut Street (325-676-6273) and the Amarillo Building Inspector at 509 Southeast 7th Avenue (806-342-1555) handle permits in cities where storms regularly damage roofs. Always confirm hours and current procedures by phone.