Code enforcement in Kentucky is a local job. No single statewide office inspects your neighbor's overgrown lot or your landlord's broken stairs. Each city, county, or merged government writes its own property maintenance and nuisance rules and hires officers to apply them. Our Kentucky directory currently lists nine offices, from Lexington in the Bluegrass to Pikeville in the Appalachian east and Henderson on the Ohio River. This page explains who does what, which laws sit behind the notices, and how to get a problem fixed or a citation resolved without wasting trips to the wrong counter.
How Code Enforcement Is Organized Across Kentucky's 120 Counties
Kentucky has 120 counties, and each one is run by a fiscal court led by a judge/executive. Cities have their own mayors and councils. Both levels can pass ordinances on junk, tall weeds, abandoned vehicles, and unsafe buildings. Neither answers to a central code enforcement department in Frankfort. That is why the offices in our listings look so different from one another.
The first question is always jurisdiction. If the property sits inside city limits, the city office usually handles it. Berea Code Enforcement at 212 Chestnut Street, Maysville City Code Enforcement at 216 Bridge Street, and Shelbyville Code Enforcement at 315 Washington Street are offices named for the cities they serve. If the property is outside any city, the county may be your only option, and only if the fiscal court has adopted an ordinance it is willing to enforce.
Merged governments change the picture. Lexington and Fayette County operate as one government, so a single division covers the whole county. Louisville and Jefferson County work the same way, although Louisville Metro is not among our current listings.
In many rural counties, code enforcement is a part-time duty. One officer may also handle planning, zoning, or solid waste. Response times can be slower, and some offices ask for complaints in writing. In larger places, dedicated officers work assigned areas and take reports by phone or online.
The Kentucky Laws Behind a Code Enforcement Notice
Local ordinances do the daily work, but state law sets the framework. The key statute is the Local Government Code Enforcement Board Act, found in KRS 65.8801 through 65.8839. It lets a city, county, or consolidated local government create a code enforcement board. The board hears cases, can order a violation fixed, and can impose civil fines.
The process under the Act is fairly consistent. An officer sees a violation and issues a citation or notice. The recipient can correct the problem, pay any fine, or ask for a hearing before the board. Board decisions can be appealed to District Court, generally within 30 days of the final order. Unpaid fines can become a lien on the property, which matters when you try to sell or refinance.
Not every Kentucky government uses a board. Some enforce ordinances through citations that go straight to court. Your notice should say which route applies. Read it for the deadline, because missing that date often closes off your chance at a hearing.
Construction is a separate track. The Kentucky Building Code comes from KRS Chapter 198B and is administered by the Department of Housing, Buildings and Construction, part of the Public Protection Cabinet. The Office of State Fire Marshal also sits in that department. Some cities and counties run their own certified building inspection programs, while elsewhere the state handles inspections. Building permits and plan review are not the same thing as code enforcement, so ask which office you actually need.
Kentucky does not hand every household one statewide maintenance code for existing homes. Each locality decides which standards to adopt. The rule about peeling paint or a sagging porch in Henderson may differ from the one in Georgetown. Always check the local ordinance, not just the state code.
City, Suburb, and Mountain Town: Regional Differences Across Kentucky
Lexington Code Enforcement, at 101 East Vine Street, covers all of Fayette County through the merged Lexington-Fayette Urban County Government. Its workload looks like any large city's: high grass, trash, rental housing, and vacant buildings. The phone number is 859-258-3270.
Bowling Green is home to Western Kentucky University, and student rental housing is a big part of the local market. Warren County Kentucky Code Enforcement is listed at 1141 State Street, 270-843-5353. The Warren County page shows the listing for that area.
Georgetown, in Scott County, has grown around the Toyota plant and the I-75 corridor. Its office is at 101 Airport Road, 502-863-7805. Shelbyville in Shelby County (315 Washington Street, 502-633-8000) and Shepherdsville in Bullitt County (149 Walnut Street, 502-921-2970) sit in Louisville's orbit. New subdivisions there grow beside older farms and small-town centers, and that mix produces its own enforcement questions.
Henderson (1990 Barrett Circle, 270-831-1277) and Maysville (216 Bridge Street, 606-564-2504) both sit on the Ohio River. Both have older housing and historic commercial districts, so neglected or unsafe buildings are a common concern. Riverfront and low-lying properties may also fall under floodplain rules, so ask before you build or repair anything near the water.
Pikeville Code Enforcement, at 104 Chloe Road, 606-437-5176, serves a city built on steep terrain in Pike County. Tight lots and slopes make drainage, retaining walls, and hillside debris practical issues to raise with an officer. Berea Code Enforcement, 859-986-8528, serves a college town in Madison County. The county seat there is Richmond, so a Berea mailing address does not always mean the city office has jurisdiction.
If your address is in Louisville Metro, which is not in our listings, contact that government directly. Its code enforcement runs under its own rules and covers all of Jefferson County.
Reporting a Problem or Answering a Notice in Kentucky
A complaint works best when it is specific. Gather these items before you call:
- The exact street address and, if you have it, the owner's name or parcel number
- A plain description of the problem and roughly how long it has existed
- Dated photos taken from a public sidewalk or your own property
- Your contact details, in case the officer has a follow-up question
- Any earlier complaint or reference number
Call first, because counter hours and complaint methods vary. Some offices take phone calls, while others prefer email or an online form. Ask whether anonymous reports are accepted. Policies differ from one government to the next.
After a complaint, the usual sequence is inspection, written notice, a compliance period, and reinspection. Citations and fines come when the owner does not fix the problem. Simple issues like trash may be resolved in days, while structural problems can take months.
If you receive the notice instead, do not ignore it. Note the deadline, call the officer named on the notice, and ask what counts as compliance. Fix the issue, take dated photos, and request a reinspection in writing. If you disagree, ask for a hearing before the deadline passes. Tenants should pass the notice to the landlord promptly, since owners are usually the ones held responsible for property conditions.
Complaint and inspection files are generally public records under the Kentucky Open Records Act, KRS 61.870 to 61.884. An agency must respond to a written request within three business days, although some records may be exempt. Ask the office how it handles requests.
Code enforcement offices across Kentucky work to maintain neighborhood safety and property standards by enforcing local ordinances on housing, zoning, and public nuisances. Oversight is primarily local, though Kentucky state law sets minimum property maintenance standards that all municipalities must follow.
Code Enforcement locations are available in 9 cities across Kentucky. They are spread across 9 counties.
Cities with the highest concentration include Berea, Shepherdsville, Georgetown, reflecting larger urban areas where code compliance is actively monitored across diverse property types.
Residents of Kentucky should know that code enforcement complaints are generally handled at the city or county level, and that response times and enforcement priorities may vary depending on local resources and ordinance specifics.
Residents of Kentucky can report code violations — such as unsafe structures, overgrown lots, illegal dumping, or zoning violations — to their local code enforcement office. Most jurisdictions offer online complaint portals, phone reporting, and anonymous submission options to make the process accessible.
Browse Code Enforcement by county across Kentucky to find the nearest location.
Local Details to Know Before You Call a Kentucky Code Enforcement Office
Nine offices are not a complete map of Kentucky's 120 counties, so a missing county does not mean nobody enforces codes there. The work may sit with a judge/executive's office, a planning and zoning department, or a city clerk. If your town is not listed, start with city hall or the fiscal court office and ask who enforces property maintenance ordinances.
Many listings sit in county seats: Bowling Green, Georgetown, Henderson, Maysville, Pikeville, Shelbyville, Shepherdsville, and Lexington. Berea is the exception, since Richmond is the Madison County seat. County pages such as Bullitt County and Shelby County show which office is listed for each area.
Some problems belong elsewhere. Failing septic systems and sewage complaints usually go to the local health department. Unlicensed work by plumbers or HVAC contractors is a matter for the state Department of Housing, Buildings and Construction, which licenses those trades. Before you dig for a fence or footing, call 811, Kentucky's free line for having underground utilities marked.
When you reach an office, write down the officer's name, the date, and what was agreed. A short follow-up email creates a record you can point to later if a deadline or fine is disputed.